Products
FBs 待上架
FBs 产品特色
.png)
Precise Positioning and High-Speed Response The PLC features built-in four-axis linear interpolation, allowing each axis to adjust acceleration and deceleration functions,easily achieving multi-speed and smooth control. Coupled with pulse positioning feedback, it can also implement closed-loop control. The software provides flexible NC positioning commands, enabling you to easily grasp precise positioning control. Four-Axis InterpolationSupports 1 to 4-axis linear interpolation Ultra-High-Speed 920KHz 5V Differential OutputOptional 100KHz/200KHz NPN or PNP | .png) |
.png) | High-Speed Counting, No Leakage The PLC's high-speed counter is a powerful counting module, widely applicable to various industrial automation scenarios. It is used for real-time monitoring and counting pulse signals, allowing the PLC to better understand the equipment status and make corresponding judgments. Eight-Channel CountingFour high-speed hardware counters + four software (5k) counters. Supports up to nine types of signals200KHz centralizing collector (MC) or 920Khz differential (MN). SSI channel binary or Gray code (requires module pairing). |
Microsecond-Level Timing, Unmatched Accuracy! A 0.1 millisecond high-speed timer, with a timing base error of only 0.1 millisecond, combined with its features, can easily accomplish speed measurement or be configured as a frequency counter. In most cases, this cost-effective method can replace expensive speed measurement equipment. 0.1 ms Precision Timing0.1 ms resolution high-precision timing, unaffected by scanning cycle period. Four-channel 32-bit HSC (High-Speed Counter). Four 32-bit high-speed HSTFour 32-bit HST are equipped with software enable switches | .png) |
Three-Phase 36 Capture InputsThe PLC's SoC contains input capture functionality, capable of seizing and storing signals with pulse widths less than the scan time from external inputs, for CPU retrieval. This not only offers high efficiency but also simplicity and convenience. | Machine 16-Point High-Speed Interrupt InputThe PLC main unit features up to 16 points of external interrupt inputs, which eliminates delays and errors caused by the CPU's scan time, and can be used for high-speed positioning of mechanical zero points, high-speed PM (Position Measurement) applications, and other high-speed and high-precision requirements. | HSPWM High-Speed Pulse Width ModulationIntegrated High-Speed Pulse Width Modulation Outputs on SoC ChipThe internal SoC (System on Chip) chip integrates 4 sets of high-speed pulse width modulation outputs. The high-speed and stable characteristics of the FBs-PLC's hardware high-speed PWM (Pulse Width Modulation) allow users to achieve precise control with ease. | ||||
.png) | .png) | .png) |
Universal PID ControlThe provided universal PID control function allows for the adjustment of the control output proportional value based on the current feedback and the required setpoint. This can be applied to any application that requires smooth, rapid, and precise control, such as motor acceleration and deceleration, flow rate, force, positioning, and other control applications. | Temperature Measurement and PID ControlThe system is capable of collecting data from a variety of temperature sensors (including 8 types of thermocouples such as J, K, T, etc., and 2 types of platinum resistance thermometers, Pt-100 and Pt-1000). The PID control operates using multi-task scanning measurement and multi-loop temperature PID control, allowing the machine to achieve the capability of 32-loop PID control. | |||
.png) | .png) |
.png)
.png)
Discover even more wonders, waiting for you to uncover
| High-Speed Communication | .png) |
| Communication is unaffected by the scan cycle, allowing for the highest communication speed to reach up to 921.6 Kbps (kilobits per second). This high-speed link capability requires only a single command on the master station, and it supports high-speed linking between up to 254 PLCs. This feature is suitable for applications where multiple PLCs are used in a distributed, real-time control setup. | |
.png) | Support for ASCII Serial Printing |
| The PLC supports direct control of ASCII output devices, allowing for the printing of common Chinese and English text. It can print data in a tabular form, such as production reports. | |
| Voice Broadcast via PLC Control | .png) |
| The PLC can control the playback of voice messages from an SD card within the module. It supports up to 245 voice messages stored, with the longest voice content supported being up to 2 minutes. Additionally, it can be connected to external speakers for audio output. | |
.png) | B2C Wireless Communication |
| 10 meters wireless communication range* Wireless remote control Plug and play *Tested in unobstructed environments | |
FBs PLC Catalog |
 |
Precise Positioning and
High-Speed Response
The PLC features built-in four-axis linear interpolation, allowing each axis to adjust acceleration
and deceleration functions,easily achieving multi-speed and smooth control. Coupled with pulse
positioning feedback, it can also implement closed-loop control. The software provides flexible
NC positioning commands, enabling you to easily grasp precise positioning control.
and deceleration functions,easily achieving multi-speed and smooth control. Coupled with pulse
positioning feedback, it can also implement closed-loop control. The software provides flexible
NC positioning commands, enabling you to easily grasp precise positioning control.
Four-Axis Interpolation
Supports 1 to 4-axis linear interpolationUltra-High-Speed 920KHz 5V Differential Output
Optional 100KHz/200KHz NPN or PNPHigh-Speed Counting, No Leakage
The PLC's high-speed counter is a powerful counting module, widely applicable to various
industrial automation scenarios. It is used for real-time monitoring and counting pulse signals,
allowing the PLC to better understand the equipment status and make corresponding judgments.
industrial automation scenarios. It is used for real-time monitoring and counting pulse signals,
allowing the PLC to better understand the equipment status and make corresponding judgments.
Eight-Channel Counting
Four high-speed hardware counters + four software (5k)
Supports up to nine types of signals
200KHz centralizing collector (MC) or 920Khz differential (MN).
SSI channel binary or Gray code (requires module pairing).
SSI channel binary or Gray code (requires module pairing).
Microsecond-Level Timing,Unmatched Accuracy!
A 0.1 millisecond high-speed timer, with a timing base error of only 0.1 millisecond,
combined with its features, can easily accomplish speed measurement or be configured
as a frequency counter. In most cases, this cost-effective method can
replace expensive speed measurement equipment.
combined with its features, can easily accomplish speed measurement or be configured
as a frequency counter. In most cases, this cost-effective method can
replace expensive speed measurement equipment.
0.1 ms Precision Timing
0.1 ms resolution high-precision timing, unaffected by scanning cycle period.Four 32-bit high-speed HST
Four 32-bit HST are equipped with software enable switchesThree-Phase 36 Capture InputsThe PLC's SoC contains input capture functionality, capable of seizing and storing signals with pulse widths less than the scan time from external inputs, for CPU retrieval. This not only offers high efficiency but also simplicity and convenience. |
|
Machine 16-Point High-Speed Interrupt InputThe PLC main unit features up to 16 points of external interrupt inputs, which eliminates delays and errors caused by the CPU's scan time, and can be used for high-speed positioning of mechanical zero points, high-speed PM (Position Measurement) applications, and other high-speed and high-precision requirements. |
|
HSPWM High-Speed Pulse Width ModulationThe internal SoC (System on Chip) chip integrates 4 sets of high-speed pulse width modulation outputs. The high-speed and stable characteristics of the FBs-PLC's hardware high-speed PWM (Pulse Width Modulation) allow users to achieve precise control with ease. |
|
Universal PID ControlThe provided universal PID control function allows for the adjustment of the control output proportional value based on the current feedback and the required setpoint. This can be applied to any application that requires smooth, rapid, and precise control, such as motor acceleration and deceleration, flow rate, force, positioning, and other control applications. |
|
Temperature Measurement and PID ControlThe system is capable of collecting data from a variety of temperature sensors (including 8 types of thermocouples such as J, K, T, etc., and 2 types of platinum resistance thermometers, Pt-100 and Pt-1000). The PID control operates using multi-task scanning measurement and multi-loop temperature PID control, allowing the machine to achieve the capability of 32-loop PID control. |
|
Discover even more wonders, waiting for you to uncover
| High-Speed Communication |
| Communication is unaffected by the scan cycle, allowing for the highest communication speed to reach up to 921.6 Kbps (kilobits per second). This high-speed link capability requires only a single command on the master station, and it supports high-speed linking between up to 254 PLCs. This feature is suitable for applications where multiple PLCs are used in a distributed, real-time control setup. |
|
| Support for ASCII Serial Printing |
| The PLC supports direct control of ASCII output devices, allowing for the printing of common Chinese and English text. It can print data in a tabular form, such as production reports. |
|
| Voice Broadcast via PLC Control |
| The PLC can control the playback of voice messages from an SD card within the module. It supports up to 245 voice messages stored, with the longest voice content supported being up to 2 minutes. Additionally, it can be connected to external speakers for audio output. |
|
| B2C Wireless Communication |
| 10 meters wireless communication range* Wireless remote control Plug and play *Tested in unobstructed environments |
|
FBs PLC Catalog |
|
