Products
M PLC Main
 | Ultimate speed leading ahead of the industry Innovatively developed high-performance processor and high-performance algorithm. Achieves ultimate up to 0.8ns for the command processing speed.Pushes the control performance to the unimaginable “ns” realm. |
Ultimate Performance and Efficiency - Hard PLC High-performance hardware design for logic operations. Low powe r consumption and high stability system architecture without fans and heat sink.Without complicated and huge OS, PLC can immediately operate with no delay when power-on. |  |
 | Ultra low delay interrupt response Achieves up to 7.7 uS interrupt response speed. With interrupt, the input response time will not be not affected by the length of the scan time. Ensure precise and immediate control needs in any situation. |
►RUN/STOP switch The physical switch can change-over the state of PLC without a computer. Significantly improve the convenience of tuning and debugging |  |
►Type-C interface Adopt USB Type-C as the standard programming interface. Project upload/download and online monitoring/editing simply with the use of common USB Type-C cable. | |
►2-channel RS-485 communication ports Built-in 2-channel RS-485 communication ports and support Modbus Client/Slave. | |
►2-channel analog input interface Built-in 2-channel 12-bit analog input interface. | |
►Convenient wiring and quick dismantling Quick wiring without tools using Push-in terminals. And can ensure contacts tightly connected to avoid poor contact. | |
High-speed pulse output and positioning control Built-in up to 8 axes and up to 200KHz high-speed pulse outputwhich can perform positioning control. And supports advancedfunctions such as interrupt constant feed and interrupt constantangle. Application such as edge grinding, edge banding andfeeding can be easily realized. | High-density integrated I/O Built-in 16 sets of digital input and output points respectively.With up to 200KHz high-speed counter and pulse output. Supportinterrupt and capture input to ensure commands and signal captureare not affected by scan time when control immediacy is extremely required. | Dual Ethernet communication interface Ethernet supports Modbus TCP, MQTT and self-defined protocol.Exchange the data with the peripheral devices, systems and platforms easily. And EtherCAT could seamlessly connect withother brands* of EtherCAT servos. Advanced motion control can be achieved by the built-in motion control function without theneed of expansion module. | ||||
 |  |  |
Micro-SD* card expansion slot Logged data can be directly stored in the Micro-SD card, and also project and OS update, data backup and restore can be performed through the Micro-SD card.It allows the user to complete data logging, project loading and system maintenance without a computer. | Battery-free program memory Program and data memory using non-volatile memory. No battery required to maintain internal data storage. Never need to worry about data loss or damage caused by battery out of power anymore. | |||
 |  |
M PLC Catalog |
 |
| Ultimate speed leading ahead of the industry | |
| |
| Innovatively developed high-performance processor and high-performance algorithm. Achieves ultimate up to 0.8ns for the command processing speed.Pushes the control performance to the unimaginable “ns” realm. |
| Ultimate Performance and Efficiency - Hard PLC | ||||||
| ||||||
| |||||
| Achieves up to 7.7 uS interrupt response speed. With interrupt, the input response time will not be not affected by the length of the scan time.Ensure precise and immediate control needs in any situation. | |||||
| |
►RUN/STOP switch The physical switch can change-over the state of PLC without a computer. Significantly improve the convenience of tuning and debugging | |
►Type-C interface Adopt USB Type-C as the standard programming interface. Project upload/download and online monitoring/editing simply with the use of common USB Type-C cable. | |
►2-channel RS-485 communication ports Built-in 2-channel RS-485 communication ports and support Modbus Client/Slave. | |
►2-channel analog input interface Built-in 2-channel 12-bit analog input interface. | |
►Convenient wiring and quick dismantling Quick wiring without tools using Push-in terminals. And can ensure contacts tightly connected to avoid poor contact. |
High-speed pulse output and positioning control Built-in up to 8 axes and up to 200KHz high-speed pulse output which can perform positioning control. And supports advanced functions such as interrupt constant feed and interrupt constant angle. Application such as edge grinding, edge banding and feeding can be easily realized. |
|
High-density integrated I/O Built-in 16 sets of digital input and output points respectively.With up to 200KHz high-speed counter and pulse output. Support interrupt and capture input to ensure commands and signal capture are not affected by scan time when control immediacy is extremely required. |
|
Dual Ethernet communication interface Ethernet supports Modbus TCP, MQTT and self-defined protocol.Exchange the data with the peripheral devices, systems and platforms easily. And EtherCAT could seamlessly connect with other brands* of EtherCAT servos. Advanced motion control can be achieved by the built-in motion control function without the need of expansion module. |
|
Micro-SD* card expansion slot Logged data can be directly stored in the Micro-SD card, and also project and OS update, data backup and restore can be performed through the Micro-SD card.It allows the user to complete data logging, project loading and system maintenance without a computer. |
|
Battery-free program memory Program and data memory using non-volatile memory. No battery required to maintain internal data storage. Never need to worry about data loss or damage caused by battery out of power anymore. |
|
M PLC Catalog |
|
